• <kbd id="2eqsi"></kbd>
  • <strong id="2eqsi"><noscript id="2eqsi"></noscript></strong>
  • <button id="2eqsi"><div id="2eqsi"></div></button>
    <input id="2eqsi"><wbr id="2eqsi"></wbr></input>
  • <li id="2eqsi"></li>

    高爐噴煤的系統解決方案

    手機: 13906141215
    郵件: nfdwy@163.com
    市場開發部: 0519-87033777 / 87033788
    留言咨詢 更多信息
    分享:
    關鍵詞: 高爐噴煤的系統解決方案           

    摘要

    高爐噴煤系統集破碎,烘干,粉磨。選粉。輸送為一體的解決方案。

    產品介紹

              破碎、烘干、粉磨、選粉、輸送

                             為一體的系統解決方案



    高爐噴煤的系統解決方案

    高爐噴煤的系統解決方案



    投資費用低

      由于集破碎、干燥、粉磨、分級輸送于-體,系統簡單,布局緊湊,占地面積約為球磨系統的50%,而且可露天布置,因此能大量降低投資費用。

    Low Investment Cost

      Because of integration of the crushing, drying, grinding and grading transportation, the system is simple and compact,with a footprint of about 50% of the ball mill system, and can be arranged in the open air, so it can greatly reduce the cost of investment.


    運行成本低

    (1)采用磨輥在磨盤上直接碾壓磨碎物料,能耗低,和球磨系統相比節約能30%~40%。

    (2)由于工作中磨輥并不與磨盤直接接觸,且磨輥與襯板采用好的材料制作,因此使用壽命長,磨損少。

    Low Operation Cost

      (1)The grinding rollers are used to crush and grind the material directly on the grinding plate, and the energyconsumption is low. Compared with the ball milling system, the energy saving is 30%~40%。

      (2)Because the grinding rollers are not in direct contact with the grinding plate, and the grinding rollers and liningplates are made of high quality material, the service life is long and the wear is less.


    烘干效率高

       立式輥磨機采用熱風輸送物料在粉磨水分較大的物料時可控制進風溫度,使產品達到要求的最終水分。在立式輥磨內可烘干入磨水分高達15%的物料,應用范圍廣。即使是烘干球磨,也只能烘干水分為3%~4%的物料。

    High Drying Efficiency

     Vertical roller mill uses hot air to transport materials,when grinding high moisture material, the inlet air temperaturecan be controlled, so that the product can reach the required final moisture.The material with up to 15% moisture can be dried in the vertical roller mill which has a wide range of application. Even if using the drying ball mill, only the material with 3% ~4% of the moisture can be dried.


    設備環保

     立式輥磨在工作中磨輥和磨盤不直接接觸,沒有球磨機金屬撞擊聲,震動小,噪音低,比球磨機低20--25分貝。立式輥磨采用全密封系統,系統在負壓下操作,無揚塵,環境清潔。

    Environmentally Friendly Equipment

     During operation of vertical roller mill, the grinding rollers do not directly contact with the grinding plate, it has no ballmill's metal impact sound, with the low vibration, low noise that is the 20- 25 decibels lower than that of ball mill. Verticalroller mill adopts fully enclosed system, the system is operated under negative pressure, no dust is raised, and the environment is clean.


    操作簡便運行可靠

    (1)裝備有自動控制系統,可實現遠程控制,操作簡便。

    (2)有防止輥套和磨盤襯板直接接觸的限位裝置,避免破壞性;中擊和劇烈震動。

    (3)借助于翻輥裝置,可將磨輥翻出磨外,輥套及襯板在短時間就能更換和檢修。

    Operation is Easy and Reliable

    (1)Equipped with automatic control system, the remote control can be realized and the operation is simple.

    (2) There is a position limiting device to prevent direct  contact between roller sleeves and grinding plate liners to avoid destruction, shock and severe vibration.

    (3) With the aid of roll-over device, the roller can be rolled out of the mill, and the roller sleeves and lining plate can be replaced and repaired in a short period of time.


    產品質量穩定

      物料在輥磨內停留的時間僅2--3分鐘,而在球磨機內則要15--20分鐘。所以立式輥磨產品化學成分及細度可以很快測定、校正,而且質量穩定。

    Product Quality is Stable

        The material stays in the roller mill for only 2-3 minutes, while in the ball mill it takes 15-20 minutes.Therefore, the chemical composition and fineness of vertical roller mill products can be measured and corrected quickly, and the quality

    Is stable.

    江蘇南方機械有限公司 江蘇華冶環保工程有限公司  版權所有

    CopyRight ? 版權所有: 江蘇南方機械有限公司 網站地圖 XML


    掃一掃訪問移動端
    亞洲成av無碼人在線觀看_在线看片av以及毛片_美女自卫慰黄网站免费观看_免费观看又色又爽又黄的视频免费